A-line & shift
One or two panels, no waist seam. The most forgiving first style — 1–2 sampling rounds.
Dresses are our most developed category: A-line, shirt, wrap, slip and occasion styles, produced from 200 pieces per style per colour (complex tier) with samples in 5–7 days.
Common variants on the same block, all adjustable to your tech pack.
One or two panels, no waist seam. The most forgiving first style — 1–2 sampling rounds.
Collar, placket, optional belt. Watch collar roll and placket alignment.
Tie or button closure, overlap front. Fit changes with tie tension, so grading matters.
Cut on the bias for drape; needs lining and a careful grain check before cutting.
Elastane blend, every measurement visible — sample in the final fabric only.
Layered chiffon, tulle, beading and handwork; 3+ sampling rounds typical.
Usual fabrics for this category — or your nominated or customer-supplied material.
| Fabric | Composition | Weight | Suits |
|---|---|---|---|
| Cotton poplin | 100% cotton | 110–130 GSM | Shirt dresses, A-line |
| Viscose / rayon | 100% viscose | 120–160 GSM | Wrap, slip, drapey styles |
| Crepe de chine | 100% polyester or silk blend | 80–120 GSM | Occasion, wrap |
| Satin | Polyester or acetate | 90–140 GSM | Slip, evening |
| Linen blend | 55% linen / 45% cotton | 150–190 GSM | Summer A-line, shirt |
| Ponte | 65% viscose / 30% nylon / 5% elastane | 220–280 GSM | Bodycon, fitted |
Private label, print, embroidery and special finishes handled inside one order.
In-house print development; rotary for repeat runs above 300 m.
Knife pleats, sunburst pleats and shirring, set by heat press.
Full or half lining, cut 1.5 cm shorter than the shell at the hem.
Hand-stitched sequins and beading for evening styles, quoted per piece.
Base-size reference for a fitted dress block — re-graded to your size curve and target market.
| Measurement | S | M | L | XL | Grade |
|---|---|---|---|---|---|
| Bust (cm) | 84 | 88 | 92 | 96 | +4 cm |
| Waist (cm) | 66 | 70 | 74 | 78 | +4 cm |
| Hip (cm) | 90 | 94 | 98 | 102 | +4 cm |
| Centre-front length (cm) | 86 | 88 | 90 | 92 | +2 cm |
Fitted blocks grade +4 cm; relaxed or oversized dresses usually grade +5–6 cm. We keep US/EU/UK base blocks and re-proportion shoulder, armhole and body length per market instead of scaling one size up.
Where the 3–4 weeks actually goes, and which decisions move it.
| Stage | Time | Notes |
|---|---|---|
| Sampling | 5–7 days | Proto plus one revision; complex styles 10–14 days |
| Fabric prep | 0–3 days stock / 15–20 days dyed | Custom dye from 300 m per colour |
| Bulk production | 12–15 days | Cutting starts after first-article approval |
| QC and finishing | 2–3 days | AQL 2.5 inspection, pressing, final check |
| Shipping | 3–6 days courier | Air for test batches; sea for replenishment |
Total roughly 3–4 weeks. Stock fabric saves another 3–5 days; booking the fabric reservation at first order is what keeps reorders at 20–25 days.
What we inspect before any dress order ships.
| Check | Standard |
|---|---|
| Shade variation | Same dye lot, grade 4 on the grey scale or better |
| Left-right symmetry | Shoulder points, waist darts and pockets within 0.5 cm |
| Hem | Level within 0.5 cm; lining not visible below the shell |
| Print / embroidery placement | Centre offset within 2 mm |
| Stitch density | 12–14 stitches per 3 cm, no skipped stitches |
| Trims | Zip runs 50 cycles; button pull strength tested |
AQL 2.5 inspection before shipment, zero tolerance for critical defects. Third-party inspection can be booked at your cost if your QA process requires it.
Dresses sit in our complex-construction tier: 200 pieces per style per colour. Mixed sizes are fine — the run can be split across S–XL in your size curve.
We can develop from a photo, but the result depends on the fabric and the construction details visible in it. A physical sample or a flat sketch with measurements gives a much closer match.
A-line and shirt dresses: 1–2. Wrap and bodycon: 2–3. Bias-cut and eveningwear: 3 or more, because drape and lining interact.
Yes. Digital print from 50 m, rotary print from 300 m, and custom dyeing from 300 m per colour. Stock fabric is faster and cheaper for a first run.
Send your reference — pricing and a sampling plan within 24 hours.
Want the whole range in one file? Download the 2026 catalogue (PDF, 32 categories).
Send a sketch, a sample or just an idea — we reply within 24 hours with MOQ, pricing and sampling advice.