Fabric is 40–60% of a garment's cost and most of how it feels in the hand. When a buyer says "the bulk feels cheaper than the sample", the cause is almost never sewing — it is a fabric substitution made somewhere between quotation and production. This guide covers the three numbers you need to specify, and the approval steps that stop substitutions.
Fabric choices land in the spec sheet — how to write them into a tech pack, and how they move the unit price.
The Three Numbers: Composition, GSM, Width
- Composition — what the yarn is made of. 100% cotton, 95/5 cotton-elastane, 65/35 poly-cotton. This drives hand feel, shrinkage, pilling and price more than anything else.
- GSM — grams per square metre. A weight, not a thickness. It tells you how substantial the fabric feels and roughly which season it suits.
- Width — usually 160–180 cm for knits, 145–150 cm for wovens. Narrower fabric means more metres per garment and a higher unit cost, even at the same price per kilo.
GSM at a Glance
| GSM | How it feels | Typical use |
|---|---|---|
| 120 – 150 | Very light, slightly sheer | Summer tops, linings, lightweight dresses |
| 160 – 180 | Standard T-shirt weight | T-shirts, light dresses, base layers |
| 180 – 220 | Midweight, more structure | Premium tees, long sleeves, heavier tops |
| 240 – 300 | Sweatshirt weight | Hoodies, sweatpants, crewnecks |
| 300 – 400 | Heavy, warm | Winter hoodies, outer layers, heavy fleece |
One caution: GSM alone does not predict quality. A 180 GSM single jersey made from a fine combed yarn feels far better than a 200 GSM fabric made from coarse carded yarn. Ask for the yarn count as well — 26s, 32s and 40s single jersey behave very differently at the same weight.
Composition, and What Each One Costs You Later
| Fabric | Typical composition | Best for | Watch out for |
|---|---|---|---|
| Single jersey | 100% cotton, 160–180 GSM | T-shirts, light dresses | 3–5% shrinkage unless pre-shrunk |
| Interlock | 100% cotton, 200–240 GSM | Premium tees, fitted dresses | Lower stretch recovery than rib |
| French terry | Cotton or cotton/poly, 240–300 GSM | Hoodies, sweatshirts | Pilling if low-grade yarn |
| Brushed fleece | 80/20 cotton-poly, 300–400 GSM | Winter hoodies | Heavy; freight cost per piece rises |
| Poplin | 100% cotton, 110–130 GSM | Shirts, blouses | Creases easily; needs pressing at retail |
| Twill | 98/2 cotton-elastane, 180–260 GSM | Trousers, structured jackets | Shade variation between rolls is more visible |
| Rib | 95/5 cotton-elastane, 220–280 GSM | Cuffs, neckbands, fitted tops | Recovery drops if elastane content is low |
| Viscose / rayon | 100% viscose, 120–160 GSM | Drapey dresses, blouses | Shrinks more; weaker when wet |
| Linen | 100% linen, 150–200 GSM | Summer shirts, relaxed trousers | Creases by design; needs a wash story |
Knit or Woven — the One Line That Changes the Pattern
Knits stretch and are cut from a tube or flat panel with elastane or natural loop structure; they need no darts and recover to shape. Wovens do not stretch, so shape comes from darts, seams and ease. Specifying a woven where the pattern was made for a knit (or the reverse) breaks the fit before a single stitch is sewn. If you are unsure, send the reference garment — we identify the construction from the seam rather than from a photo.
How Fabric Gets Approved (Five Steps)
| Step | What happens | Time |
|---|---|---|
| 1. Brief | Composition, GSM, hand-feel reference, target price | Day 0 |
| 2. Swatch | A4-size hand samples in 2–3 options, with price per kg | 2–4 days |
| 3. Lab dip | Colour matched to your Pantone/reference under D65 light | 3–5 days |
| 4. Bulk fabric inspection | 4-point system: shade, width, GSM, defects per 100 m² | 1–2 days on arrival |
| 5. Lot reservation | Same dye lot held for reorders | At order close |
Step 3 is where most colour disputes begin. Approving a lab dip on a phone screen or under office lighting is not approval — the colour will read differently under daylight and inside a store. Approve under D65 and keep the physical dip.
Fabric Minimums Decide What a Realistic First Order Looks Like
A 200-piece custom order needs roughly 300–450 metres of fabric — right at most mills' 300–500 metre per colour minimum, and custom dyeing usually starts at 300 m. Fabric — not the sewing line — is what sets the real floor under small orders, and it is the first thing we check when quoting a first production run. This is also why undecorated blanks on stock fabric can start at 30 pieces.
There are three honest ways around it, and we use all three:
- Stock colours. Run your test in a colour the mill already holds — no dye minimum, and often a lower price per kg.
- Share a dye lot. Combine your 100 m with another order in the same colour. You get the colour, the mill gets a full batch.
- Pay the dye minimum once. If the colour is core to the brand, buy 300 m, use 100 m now and hold the rest for the reorder. Cost per metre is unchanged; cash outlay is higher.
What Fabric Actually Costs
Indicative ranges for planning, not quotations: 180 GSM combed cotton jersey runs around $2.5–4.0 per kg (a T-shirt uses roughly 0.25 kg, so $0.7–1.0 of fabric per piece). 300 GSM fleece runs $3.5–5.5 per kg, and a hoodie uses about 0.7 kg. Custom dyeing adds 10–20%; GOTS or GRS certified stock adds more and requires traceability documents from the mill, not just a claim on the label.
How to Brief Us on Fabric
Send three things: a photo of a fabric you like (or a garment you own), the intended use and season, and your target price per piece. We come back with two or three concrete options — composition, GSM, mill, price per kg, and the MOQ implication for your quantity. If you already have a fabric supplier, we are equally happy to work CMT on your material — see private label development for how that runs, browse categories for typical fabric per product, or send your brief and we will reply within 24 hours.
Need the whole range rather than one category? Download the 2026 product catalogue (PDF) — 19 apparel categories and 13 footwear series, with MOQ and lead times for each.
Have a style to produce?
Send your reference, quantity and destination — we reply with a full quote within 24 hours.
Get a Quote Open the catalogue