Custom Hoodie Manufacturing: Fabric, Print and MOQ Guide

A hoodie looks like the simplest garment in the catalogue and is one of the easiest to get wrong at scale. Four decisions — loop structure, weight, hood construction and decoration method — account for most of the difference between a hoodie that sells at $28 and one that sells at $95. None of them is decided by the factory alone.

Most hoodie problems start in the fabric — compare French terry and fleece weights, then check where the cost actually sits.

1. Loop Structure: Terry, Fleece or Jersey

ConstructionInsideTypical GSMFeelBest for
Single jerseySmooth160–220Thin, T-shirt likeSummer "hoodie" tops, not real hoodies
French terry (loopback)Visible loops240–300Dry, breathable, midweightSpring/autumn, premium streetwear
Brushed fleeceBrushed pile300–400Soft, warm, bulkyWinter, university and team merch

Loopback is the current default for premium brands because it holds shape and does not pill as fast. Brushed fleece feels better on the shelf and worse after ten washes if the yarn is cheap — ask for the pilling grade (3–4 minimum on the Martindale or a 3-wash visual check).

2. Weight: What GSM Actually Changes

  • 240–260 GSM — light, good for layering, cheapest freight per piece.
  • 280–320 GSM — the volume zone; reads as "substantial" without being heavy.
  • 340–400 GSM — heavyweight, boxy silhouettes, higher fabric cost and higher freight (a 400 GSM hoodie can weigh 0.9–1.1 kg).

A practical note on freight: going from 280 to 400 GSM adds roughly $1–2 per piece by air. On a $30 retail hoodie that is tolerable; on a $22 one it is not.

3. Hood and Trim Details Buyers Notice

  • Double-layer hood vs single layer — double holds shape when down, costs more fabric.
  • Drawcord — flat vs round, metal vs plastic tipping, eyelet finish. Metal eyelets and tipping are the fastest perceived-quality upgrade.
  • Ribbing — 2x2 rib with 5% elastane recovers; cheap ribbing stretches out at the cuff within a month.
  • Neck tape — covers the inside back neck seam; a small detail that separates wholesale from retail quality.
  • Stitch density — 12–14 stitches per inch on main seams; below 10 reads as fast fashion.

4. Decoration: The Decision That Sets Your MOQ

MethodCost per pieceDurabilityColoursMin orderBest for
Water-based screen print$0.5–1.5Good, soft handOne screen per colour50Large flat graphics on light garments
Plastisol screen print$0.8–2.0Very good, thickerOne screen per colour50Bold graphics on dark garments
Embroidery$1.5–4.0BestUp to 12–15 threads50Logos, chest marks, small text
DTG (direct to garment)$3.0–6.0MediumFull colourFrom 1, but expensive per unitPhoto-real prints, very small runs
Puff / flock / silicone$1.0–3.0MediumUsually single colour1003D texture effects

Two rules that save money: keep the number of print colours low (each colour is a screen setup fee), and put embroidery on a flat panel rather than across a seam. A logo crossing the hood seam or the kangaroo pocket edge will pucker — every time.

5. The Wash Test Nobody Runs Until It Is Too Late

Ask for a 3-wash test report before bulk: colour fading, print cracking, pilling, shrinkage and rib recovery. Typical acceptable shrinkage for cotton fleece is under 5%; if the factory cannot provide the number, they have not tested it. Wash the sample yourself once — one home laundry cycle tells you more than a spec sheet.

MOQ and Price Tiers

QuantityTypical unit price indexNotes
500 pcs100 (baseline)Stock fabric and stock colour only
1,000 pcs92–96Custom labels become economical
2,000 pcs84–90Custom dye lot possible
5,000+ pcs75–82Best fabric pricing, dedicated line time

Blank hoodies start at 30 pieces per colour; custom decorated hoodies at 200 per style per colour. Splitting a 200-piece custom run into four colours is possible but pushes you onto stock fabric for all four, which limits the colour range more than the MOQ does.

A 500-Piece Hoodie, Costed

320 GSM loopback, double-layer hood, metal eyelets, chest embroidery, custom neck label and woven tag: fabric around $3.4 per piece, trims $1.1, labour $2.6, decoration $1.2, packaging $0.4 — roughly $8.7 ex-works at 500 pieces. This is a reference structure rather than a quote — decoration area and fabric weight move the number the most. Full breakdown methodology is in the cost article.

We produce hoodies in all three constructions, with screen print, embroidery and DTG in house or through vetted partners. See the category page, read how small-batch testing works for hoodies, or check corporate and team orders if you need size runs and logo placement. Send your spec for a quote within 24 hours.

Need the whole range rather than one category? Open the 2026 catalogue (24 pages, PDF) — 19 apparel categories and 13 footwear series, with MOQ and lead times for each.

Have a style to produce?

Send your reference, quantity and destination — we reply with a full quote within 24 hours.

Get a Quote Open the catalogue

Related guides

More in this series — Product Development

How to Write a Tech Pack a Factory Can Actually Use · Fabric Guide for Clothing Brands: Composition, GSM and Sourcing · Building a Size Curve for US, UK and EU Markets · Custom Dress Manufacturer: A Sourcing Guide for Womenswear Brands

OEM / ODM · PandOrigin

Have a style to produce? Send us your references

Send a sketch, a sample or just an idea — we reply within 24 hours with MOQ, pricing and sampling advice.

Get a Quote WhatsApp